Getting an electric car does not mean that it will not be served, but it reduces the amount of money you will need during the services. Compared to oil or diesel, as you will have to serve almost everything after some miles, EV compounds, some of which may take more than a year. Below is a procedure for a service a Tesla Model 3 And periods of separation between service.
1. Breaking liquid checks
The condition of the separation liquid can be examined every 4 years. When the fracture liquid indicates the need to replace, you are supposed to flow a fracture liquid. The liquid breakfast break includes lifting the car and removing all the four wheels. Reducing the car to the height of work, removal Square less than UnderhoodClean the area surrounding the liquid tank fracture and remove the cap. Add a clean broken liquid to the maximum level.
We comment Pressure cover To the tank and put pressure on 30 pounds. LH fabrics are bleeding the brake first by removing the outer valve cover and connecting the hunting bottle to the valve. You can continue the RH break. This procedure is the same for gasoline compounds; You will only need to watch the liquid goes out so that there are no graduate air bubbles. Next, remove the pressure cover and tighten the valve cover, and make sure the tank is fill to a maximum with the continuation of other wheels with these steps.
2. Tire rotation
After every 6250 miles (10,000 km), the tires may need to rotate. this It increases the quality of the car riding And dealing with the four tires of the same age, depth of the scale, and model. The rotation process guarantees regularly to be able to wear it at the same rate, which increases their service life. The rotation can be performed every 6250 miles (10,000 km) or the depth of the difference from 2/32 at 1.5 mm or more.
The process includes removing all four wheels, checking if the tires are compensation or direction, or continued by reinstalling the wheels again according to the types of tire And benefit the service mode (at the bottom of the touch screen), move to the structure to align and a frame to reset the value of the tires learned, and click Operation. Continue by clicking on the wheel service and tires control items, choosing the tire season, and clicking on reset.
Discover the Tesla 300 SL Gullwing: Mercedes Benz 300 SL, which is powered
After resetting, check whether the miles are displayed in the tire service in the upper right corner as “less than 500 km”, the exit service mode, the LH front door closed, and the customer informs that the short calibration engine cycle may be needed.
There are other services. Procedures that may require replacing the cabin air filter, identification of wheels, clean brake and lubrication caliphate, and replacement of drought A/C. We got this information from the official Tesla website, which you can visit here To learn more.